Problem-0056: Electrical Measurements and Instrumentation objective question

Submitted by Tapan on Thu, 01/27/2011 - 14:21

This Question consists of two statements, one labelled as the 'Assertion (A)' and the other as 'Reason (R)'. You are to examine these two statements carefully and select the answers to these items using the codes given below:

Assertion (A): A percisison instrument is always accurate.
Reason (R): A precision instrument is one where the degree of reproducibility of the measurements is very good.

a. Both A and R are individually true and R is the correct explanation of A
b. Both A and R are individually true but R is not the correct explanation of A
c. A is true but R is false
d. A is false but R is true

Related Items

Problem-0130: Electrical Circuits, signal and systems Conventional question

When can a two-port circuit shows in Fig. 4 reciprocal? Justify the answer by a 15V voltage source. [Marks-12]

Problem-0129: Electrical Circuits, signal and systems Conventional question

Three identical coils are connected in star to a 200V, 3-phase supply and each takes 400W. The p.f is 0.8 lagging. What will be the magnitude of line currents and total power if the same coils are connected in delta to the same supply?

Problem-0128: Electrical Circuits, signal and systems Conventional question

Compute the steady-state current in the [tex]8\Omega[/tex] resistor in the circuit given in Fig.3. [Marks-12]

Problem-0127: Electrical Circuits, signal and systems Conventional question

A sinusoidal voltage [tex]e(t) = 141\sin 314t[/tex] is applied to an initially de-energised series R-L circuit in which [tex]R = 100\Omega[/tex] and L=0.5H.

Problem-0126: Electrical Circuits, signal and systems Conventional question

The following mesh equations pertain to a network: